By continuing to browse the site you are agreeing to our use of cookies.
Accept
01.
Thermal Management
02.
In Detail.
03.
Production Chain.
Thermal Management
Our Thermal Management Systems Keeps Electric Vehicles at Just the Right Temperature.
In Detail.
New Technology. New Demands.

The advent of large electric vehicles poses interesting challenges as well as opportunities. Heat isn’t an ample byproduct, “refueling“ becomes a time-consuming task and batteries need careful temperature management. Our thermal management systems are a complete solution that keeps everything running at the right temperature, as long as possible – day-to-day and year after year.

In Detail.
Cooler.
Just the Right Size.

Our new cooler is designed especially for the lower working temperatures of electric vehicles, offering reductions in both weight and size. By minimizing the use of compressor and fans to save energy, it helps decrease battery usage and increases the vehicle’s operating range.

Made for
EVs
Compressor.
Double Duty.

Our integrated high-voltage compressor supersedes the HVAC compressor and supplies cooling for both the HVAC and battery. It is directly driven from the main high-voltage battery for maximum efficiency.

High
voltage
Heater.
High Voltage. High Efficiency.

High-voltage heaters deliver heat for both the battery and HVAC. The heaters (high-voltage driven to eliminate energy losses caused by conversion) are managed by the control system and used sparingly since heat generated from the driveline is used.

High
voltage
Recycled
heat
Control System.
The Brains of the Operation.

The control system in our Thermal Management Systems, in conjunction with our expertly programmed ECU, take ambient temperatures and driving cycles into account in order to carefully balance cooling and heating needs throughout the system – always with the aim of conserving the battery to increase the vehicle’s operating range.

Control System.

Driveline

Our TMS makes sure that every component is cooled to its individual optimal operating temperature. To save energy, excess heat is recycled and used for heating the cabin and battery.

Battery

To ensure peak performance and a long life cycle, the battery temperature is constantly monitored and kept at an optimal 25°C.

HVAC

To keep the system efficient, simple and compact, the HVAC is supplied with heater and compressor

Summary.
In Short.

We deliver complete Thermal Management Systems characterized by high flexibility and a modular approach where an intelligent ECU works in tandem with coolers, heaters, pumps and compressor – all tailored for electrical vehicles with three goals in mind: smooth operation, energy saving and high efficiency.

Less
charging
Lower carbon
footprint
Longer
lifetime
Production Chain.
A One-Stop Technology Shop.
We make complete cooling, thermal management and hydraulic systems from the ground up. Combining extensive engineering and application knowledge with state-of-the-art production means we can ensure superior quality, while keeping the time from order to prototype as short as possible.
A One-Stop Technology Shop.
We make complete cooling, thermal management and hydraulic systems from the ground up. Combining extensive engineering and application knowledge with state-of-the-art production means we can ensure superior quality, while keeping the time from order to prototype as short as possible.
Calculation
To Find the Best Solutions, We Look Into the Future.
Based on our extensive application knowledge and thermodynamic expertise, we have developed Seidr – a state-of-the-art calculation tool that models the behavior of fans, liquids, materials, headers and more. This helps us create a first, optimized layout before we
start modeling.
3D-model
A First Look at Something Really Cool.
After getting agreement on our layout, we begin modeling the design in exact detail. After we’ve thoroughly examined the 3D-model, it’s sent to you – no more than one week after the agreement is finalized.
Production drawings
Getting Down to the Nitty Gritty.
After your agreement, the final design is broken up into detailed production drawings to enable manufacturing of each individual part. With a complete bill of materials, it’s time to start production.
Component production
Making Sure There is No Weakest Link.
All parts included in the complete BOM of the final product are manufactured. Either internally in our own production facilities – we have full control of the production chain with capacity for aluminum matrix and steel production – or by handpicked and approved suppliers that meet our high demands on quality and delivery times.
Prototype assembly
Ready for Testing.
Every new product will pass a prototype assembly where both production and design thoroughly evaluate the prototype to ensure that all design and customer specifications are met or exceeded.